TotalBoat FlexEpox Flexible Epoxy Adhesive (8 Ounce)
TotalBoat FlexEpox Flexible Epoxy Adhesive (8 Ounce) by TotalBoat at eHow Blog. MPN: TB-FLEXEPOX. Hurry! Limited time offer. Offer valid only while supplies last. Two-part TotalBoat FlexEpox has the powerful adhesive bonding strength epoxy is known for, but it's much more flexible than traditional epoxy resin/hardener formulas, and can absorb stresses caused by excessive flexing without delaminating or cracking. It creates permanent, waterproof structural bonds on metals and is perfect for repairing leaky aluminum boats. Also adheres strongly to fiberglass, most plastics, stone, glass, and wood-even oily domestic and tropical hardwoods that are
Product Description & Reviews
Two-part TotalBoat FlexEpox has the powerful adhesive bonding strength epoxy is known for, but it's much more flexible than traditional epoxy resin/hardener formulas, and can absorb stresses caused by excessive flexing without delaminating or cracking. It creates permanent, waterproof structural bonds on metals and is perfect for repairing leaky aluminum boats. Also adheres strongly to fiberglass, most plastics, stone, glass, and wood-even oily domestic and tropical hardwoods that are typically very difficult to glue. This versatile adhesive has a honey-like viscosity that's thick enough not to drain out of bonded joints, yet fluid enough to wet out fiberglass cloth and tape easily. Perfect for putting skid plates on canoes and kayaks or fabricating laminated parts that are subjected to extreme flexing. FlexEpox forms tough, dependable bonds whether it's applied to dry or damp surfaces, and can be used in temperatures as cool as 40°F and as warm as 125°F. In the right conditions, it can even cure underwater. It's so easy to use, with a simple 1 to 1 mix ratio by volume and generous working time for bonding and clamping. At 72°F, pot life is 40 minutes, working time (thin film) is 75 minutes, initial cure time is 3-4 hours, workable cure time is between 7 to 10 hours. Wait a minimum of 24 hours before subjecting to high loads. TotalBoat FlexEpox compares to West System G/Flex 650, but maintains its form better at higher temperatures, and is a better value. Compared to typical one-part flexible marine urethane adhesives, FlexEpox is more flexible and has better long-term performance. The 8 oz. Kit contains one 4 oz. bottle of resin and one 4 oz. bottle of hardener. The 32 oz. Kit contains one 16 oz. bottle of resin and one 16 oz. bottle of hardener. All TotalBoat products are developed by boaters for boaters, to provide great value and great results. We know what works and what doesn't. 100% made in the USA.
Features & Highlights
- Two-part flexible epoxy adhesive produces permanent, structural bonds with high flex tolerances.
- Easy 1:1 mix ratio, long working time, and fast cure time for reliable results-every time.
- Waterproof bonding of wood, metal, fiberglass, glass, most plastics, stone, and masonry.
- Can be used in cooler temperatures, on damp surfaces, and can even cure underwater.
- Ideal viscosity for bonding joints or wetting out fiberglass fabric and tape to create flexible laminates.
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by TotalBoat, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By System Three
mpn: 0102K40, ean: 0646697100465,
System Three General Purpose Epoxy is our original product. It actually gave the company its name. From the founding of the company until just a few years ago it has been the workhorse of the product line. The system formulation, containing one resin and three curing agents or hardeners contains a significant amount of renewable materials. Long before ''green” was in vogue the System Three General Purpose Epoxy System contained as much as 30% plant derived materials and has never contained
By Simpson Strong-Tie
sku: 748345, mpn: SET-XP10, ean: 0707392580409,
Set-xp is a 1: 1 2-component, high solids, epoxy-based anchoring adhesive Formulated for optimum performance in both cracked and untracked concrete. When set-xp adhesive is used with all threaded rod or rebar, the system can be used in tension and seismic zones where there is a risk of cracks occurring that pass through the anchor location. It is also suitable for untracked concrete conditions.Set-xp is a 1: 1 2-component, high solids, epoxy-based anchoring adhesive formulated for optimum
By PC Products
mpn: 128114, ean: 0054983128114,
PC-11 was formulated as a true marine epoxy, allowing users to bond to wet, dry and fully submerged substrates. PC-11 formulation provides extended working time, for large and critical jobs, which allows the user to reposition work or make changes. High ''wet grab'' or tack of PC-11 makes overhead and sidewall work easy without drip or sag. PC-11 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. In cold or cool
By EZ Epoxy- Tabletop Epoxies Resin
Offering a beautiful and uniform gloss to a table, bar or craft project is now easier than ever before with the amazing Epoxy clear resin, a must-have coating that will help you out with any DIY project. Why should you purchase this item? Because it is the highest quality epoxy available,It is also super easy to use and 100% Voc free . This amazing crystal-clear Epoxy formula is used with a 1:1 ratio mix and dries to a glossy rock hard finish. It has a very low odor, while the special Epoxy