Free Shipping Included! Replacement Battery Quartz Movement for Hermle 2114, 2115 or Any Clock, DIY Clock Kit with Howard Miller 354471 / Kieninger QQA10, 16mm Shaft Length by QWIRLY at eHow Blog. Hurry! Limited time offer. Offer valid only while supplies last. Battery quartz movement, uses 2 C batteries (batteries not included). Part number 354471. Westminster, Ave Maria electronic chime with 4/4 or hour
Product Description & Reviews
Battery quartz movement, uses 2 C batteries (batteries not included). Part number 354471. Westminster, Ave Maria electronic chime with 4/4 or hour only selection. 21mm stem length. 66mm diameter speaker with 22mm diameter magnet. 32cm speaker wires, Night shut off, volume control. Kieninger part QQA10.
Features & Highlights
- Howard Miller 354471 / Kieninger QQA10 Battery quartz movement. Uses 2 C batteries to operate. Batteries are NOT included. This is a direct replacement for the Hermle 2114 and 2115 models which are no longer in production.
- This movement is programed to play your choice of Westminster or Ave Maria chimes. It plays ascending chiming melody on each 1/4 hour, then plays the full melody at the top of the hour, then strikes the hour after playing the full melody. Can also be set to play just the full Westminster melody plus the hour strike at the top of the hour, without playing the ascending melody on the 1/4 hours.
- The movement has automatic night shut off and can be set to play 24 hours a day or set to shut off at night for 8 hours. Volume control. Speaker is 2 9/16" (66 mm) with 22 diameter magnet. 32cm speaker wires allow you to mount the speaker for the most advantageous sound. This is a very versatile quartz clock unit with superior sound quality allowing you to enjoy the convenience of the quartz clock but the rich and deep sound of the mechanical one.
- IMPORTANT: Please note the measurements carefully, particularly when using this as a replacement movement. We have the same movement available in different sizes so choose the correct one for your clock. This movement has 16mm (about 1/2") stem length for dials up to ¼" thick. Please measure the length of the hand shaft on your existing clock movement from the front of the movement to the tip.
- Brand new and under warranty from Kieninger/Howard Miller. Comes with mounting nuts, washer, rubber spacer washer, minute hand nut, and installation instructions.
6.1 x 5.9 x 10.9 inches
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by QWIRLY, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
By American Educational Products
Digital Stopwatch This electronic stopwatch comes complete with battery and carrying cord. Featured on this stopwatch are hour, minute, second, calendar display, 24 hour stopwatch, hourly chime, alarm, split time and total time, 12 or 24 hour mode op...
By Heathrow Scientific
Lab Alert Pocket Timer/Stopwatch/Clock Features: Four independent timing channels with visual and audible alarms Use as a stopwatch, a count up/down timer, or a clock Includes spring clip and magnetic back 61 x 71 x 25 mm...