Free Shipping Included! DIYHD 6FT Ceiling Mount Bracket Concentric Circle Roller Stainless Steel Sliding barn Wood Door Track Hardware by DIYHD at eHow Blog. MPN: ssceiling6ft. Hurry! Limited time offer. Offer valid only while supplies last. Ceiling mount bracket barn door track kit mainly suitable for the opening that don't have enough space to install wall mount track. The kit only
Product Description & Reviews
Ceiling mount bracket barn door track kit mainly suitable for the opening that don't have enough space to install wall mount track. The kit only suitable for door thickness: 1 3/8"~1 3/4"(35mm-45mm) please make sure your ceiling is strong enough to hang door panel our track had been pre-drilled holes for ceiling bracket step to install ceiling barn door kit: step 1: prepare door panel and hardware: door panel's height is ceiling height-14mm, PLS use thickness 40mm door panel. Drill two holes on the door panel and cut a groove on the bottom of the door.(See our posted drawing photo) step 2: fix rollers on the door panel. Step 3: put two stops on the track and found a best place before install ceiling bracket. Step 4: fix track on the ceiling: release the screws on the ceiling bracket and fix half part(round) on the track, the other part(l) tight on the ceiling. A: release the little screws on the round part, put the cylinder piece inside of the track then tight the screws, please see attached photo. Bï¼šstand the door up and found a best place on the ceiling to install L part brackets can decide the gap between door and wall). c: tight the L part on the ceiling, then put two bracket parts together. Step 5: install floor guide.
Features & Highlights
- Hardware only,not including door panel;Material:stainless steel 304;Surface:brushed satin
- Suitable for door thickness 1 3/8"~1 3/4"(35mm-45mm);Two rollers can bear max weight 90kgs;Package's including:Roller:2pcs;Stopper:2pcs;6ft sliding track:1pcs;L ceiling mount bracket:4pcs;Floor guide:1pcs
- Important:Door height is ceiling height minus 9/16"(14mm);Drill holes on the door panel(the length between center hole and the top of the door panel is 1-9/16"(40mm);The ceiling bracket inner center hole to the wall length is 2-3/8"(60mm)
- The advantage of this product is supper small gap between door and ceiling and the controllable gap between door and wall
Sliding Door Hardware
6FT Ceiling mount bracket
Tools & Home Improvement
74 x 3.4 x 7.4 inches
7.4 x 3.39 x 73.58 inches
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by DIYHD, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
By Vancleef Hardware
mpn: VAN8136, ean: 0689837912894,
Our Vancleef products have been redesigned with consumers in mind. We have changed the product to have less pieces so installation is now more simple and quick. All tracks 8' and below are now using the American Standard spacing (16") and are one si...
mpn: CT90CORN, ean: 0713325992249,
Our 90 and 45 degree curved ceiling track sets are easy to install and connect to our ceiling track sets and ceiling track room divider kits. These curved tracks provides the perfect way of turning both tight and loose corners in your space. The pe...
By LL VANCLEEF
mpn: VANCLA-DD-120, ean: 0689837920479,
Product Features & Pre-install Notice:1. Only the hardware is for sale, DOOR IS NOT INCLUDED. 2. The product is made of premium carbon steel. The track is 1-1/2 inches wide and 1/4 inch thick. The standard roller wheel diameter is 2-3/4 inches and th...